Promax RP-110 Manual De Instrucciones página 48

Three lines below the horizontal axis of the graph indicate the range covered by
each one of the frequency bands listed above.
Press the key SEL
Press the cursor key UP or DOWN
c) POWER LEVEL
It defines the power to which the selected pilot signal is emitted.
Press the key SEL
Press the cursor key UP or DOWN
The acceptable range of valour's are from 80 to 110 dBµV in 1 dB steps.
d) ENABLED / DISABLED SIGNAL
It allows you to enable or disable the emission of the signal.
Press the cursor key UP or DOWN
to disabled.
When a pilot signal is enabled it appears on the screen with a solid color. When
it is disabled it appears with dashed lines.
For example, to change the settings of the pilot signal number four (P4), you
should press the selection button
shaded. Then press the cursor keys UP or DOWN
signal number four (P4). Press again the selection key
you want to change and enter the new value using the cursor keys UP or DOWN
[4].
10-2010
[3] to move from a digit to another.
[3] to move from a digit to another.
[3] until the first field of the parameters list is
USER'S MANUAL. RP-110
[4] to change the digit.
[4] to change the digit.
[4] to switch from enabled signal
[4] until selecting the pilot
[3] to select the parameter
Página 12