Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fixation plate
This plate is provided to be attached to the
tower. Another one is assembled on the
wind turbine base.
Its function is to secure wind turbine,
offering
an
ease
of installation
and
removal from the tower at any moment.
The plates are made with slots to allow
the cables to pass through without twists.
They are attached with Allen bolts and six
holes are provided for six M10x40 Allen
bolts, with M10 washers on both faces and
six M10 nuts. The bolts set and tower plate
are served in an independent plastic bag, if
not mailed before.
Tail / Tube tail
The tail is made to keep the wind
turbine facing into the wind at any time.
The tail is made of two different
pieces: a polyethylene vane and a steel
boom. They are put together with
three M6x80 bolts, six wide-series M6
washers on both sides of the vane, and
three M6 self-locking nuts.
37
Capítulos
Tabla de contenido
