Maintenance; Montagetip - Hewi 950 Serie Instrucciones De Instalación Y Funcionamiento

Montagehinweis | Mounting information | Consigne de montage | Montagetip
Indicazioni per il montaggio | Indicaciones de montaje | Wskazówki do montażu
Safety advice
∙ Only use the HEWI hinged seat in the manner
described in the instructions.
∙ Improper installation/use can cause accidents
and injuries.
∙ The installer must pass on the installation and
use instructions to the user and they must be kept
for the whole life of the product.
Mounting
∙ On acceptance the product must be checked for
damage; any defects must be reported immediately.
∙ The product must be stored in a dry place and free
from pressure.
∙ The surface of the seat is sensitive and can suffer
scratching caused by dust or dirt on or near the
installation site. Keep the seat in its packaging
whenever possible.
∙ Mounting only by persons familiar with mounting
of the product and appropriate qualifications for
their activity.
∙ The wall on which the seat is to be installed must
be flat, firm and capable of taking the load. Only use
fixing materials approved by the wall anchor manu-
facturer for the intended purpose. In case of doubt,
contact HEWI's sanitary products customer service.
∙ After installing the seat, perform a functional test.
Utilisation
∙ The HEWI hinged seat is designed for a maximum
static working load of 150 kg vertically.
∙ Do not use this seat for weights in excess of this.
Any non-compliance with loading limits can cause
permanent damage to the seat. In such cases, the
seat must be examined by a specialised company
work prior to the seat being used again.
∙ The fact that the seat bends to a certain extent
under load is normal.
∙ Do not use the hinged seat for any purpose other
than that for which it is intended, e.g. do not use
it as gymnastics equipment or as a climbing aid
or step.
∙ When the seat is folded down ensure that there
is no part of the body under the product.
Observe notes in separately enclosed
instructions, e.g. care tips or in the
HEWI Online catalogue.
8 | HEWI

Maintenance

The product must be serviced annually.
1. Seat fixing
2. Function and adjustment of the brake unit
Care and cleaning instructions
HEWI products are easy care and easy to clean.
Frequently, occasional wiping with a damp cloth
is sufficient. If using cleaning products the following
should be noted:
∙ Only use cleaning products with a pH value
between 6 and 8.
∙ Cleaning products that contain detergents such
as phosphates, soaps and tensides (surfactants)
as their active substances can be used.
∙ Please note and follow the cleaning product manu-
facturers' instructions (concentration, contact time).
∙ Do not use alkali, acidic or chlorine-based cleaning
products or cleaning products with scouring agent
additives
∙ Do not use any scouring cleaning equipment, e.g.
brushes
∙ Do not apply the cleaner directly to the surface,
but always pour it on the cleaning cloth instead.
Disclaimer
HEWI does not accept any liability whatsoever for
personal injuries or damage to property that is or
has been caused due to incorrect assembly, installa-
tion or use, especially due to disregard of the listed
warnings and safety instructions.
Disposal
Proper disposal is subject to the applicable national
statutory regulations.