Refrigerator Section; Refrigerator Shelves - Sears Kenmore Elite 795.7303 Serie Manual Del Usuario

REFRIGERATOR SECTION

REFRIGERATOR SHELVES

The shelves in your refrigerator are adjustable to meet
your individual storage needs. Your model may have glass
or wire shelves.
Adjusting the shelves to fi t items of diff erent heights will
make fi nding the exact item you want easier. Doing so will
also reduce the amount of time the refrigerator door is
open which will save energy.
IMPORTANT: Do not clean glass shelves with warm water
while they are cold. Shelves may break if exposed to
sudden temperature changes or impact.
NOTE: Glass shelves are heavy. Use special care when
removing them.
Adjusting Shelves
Remove shelves from the shipping position and replace
shelves in the position you want.
To remove a shelf—Tilt up the front of the shelf
and lift it from below
To reinstall a shelf—Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired height.
Then, lower the front of the shelf so that the hooks
drop into the slots.
CAUTION: Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf
falling or food spilling.
. Pull the shelf out.
2
Slide Out Shelves (optional on some models)
Some of the refrigerator shelves can be slid in and out of
the refrigerator by carefully pulling the front of the shelf
toward you or pushing the shelf in until it stops.
Folding Shelf (on some models)
You can store taller items, such as a gallon container
1
or bottles, by simply pushing the front half of the shelf
underneath the back half of the shelf. Pull the front of the
shelf toward you to return to a full shelf.
21
USING YOUR REFRIGERATOR