Klarfit Ultimate Gym 9000 Manual Del Usuario página 40

EN
6
Attach the Seat Frame (9) and Plate (42) to the Support Frame (6), using two M10X70mm Hex Bolts (100), four M10 Washers (112) and two M10
Nylon Nuts (117).
Attach the Leg Extension Frame (8) to the Seat Frame (9), using one M12X75mm Hex Bolt (97), two M12 Washers (110) and one M12 Nylon Nuts
(116).
Insert two Long Foam Tubes (14) into the Leg Extension Frame (8) and the Seat Frame (9).
Slide four Leg Extension Foams (51) onto the Long Foam Tube (14).
Attach the two Single Pulley Blocks (41) to the Support Frame (6), using two M10X65mm Hex Bolts (101), four M10 Washers (112) and two M10
Nylon Nuts (117).
40