Niko 09-013 Manual De Instrucciones página 53

09-013/09-014/09-016/09-017
3.4 FLUSH MOUNTING DIMMER FOR OHMIC AND CAPACITIVE
LOADS 09-017(-01) (MAX. 320VA, 230V~, 50Hz)
TECHNICAL DATA
- only suitable for:
–> incandescent lamps max. 250W, min. 20W
–> halogen lamps 230V~ max. 250W, min. 20W
–> low-voltage halogen lamps with electronic transformers max.
320VA, min. 20VA
- the min. load depends on the type of lamp or electronic transformer.
For certain combinations, the load must be increased up to 35W
or more. If the load cannot be increased, the electronic pre-charge
(09-016-10) must be used.
- built-in two-way switch
- humfree
- electronic short-circuit protection with automatic reset function
- thermal overload protection with automatic reset function
- radio interference suppression in conformity with EN 55015 and
CISPR 15
EN
14
CEBEC
R,C
51