Reassemble Mask; Replacement Parts; Disposal Instructions - DeVilbiss Healthcare FlexSet 9354 Serie Guía De Instrucciones

REaSSEmblE maSk

1
Replace mask cushion on mask body by first aligning the top
alignment mark on cushion with alignment arrow on mask
body. Push the top area of cushion onto mask body, then
continue attaching along sides and bottom until cushion is
completely secured. nOTE–If necessary, adjust cushion
position to eliminate wrinkles.
nOTE–For optimum mask performance, it is recommended that you replace your mask at least once a year. See your
DeVilbiss equipment provider for replacement information.
WaRNiNg
This nasal CPAP mask is intended for single-patient use only. The mask may be cleaned and reused on the same
person.

REPlacEmENt PaRtS

MODEl
Complete 9354L
Mask
9354D
9354S
9354GL
9354G
9354GS
9354LR
9354DR
9354SR
9354GLR
9354GR
9354GSR

diSPoSal iNStRuctioNS

Parts no longer used can be disposed of as normal household waste.
A-9354
DEsCRIPTION
Large, Silicone
Medium, Silicone
Small, Silicone
Large, Gel
Medium, Gel
Small, Gel
Large, ComfortTouch
Silicone
Medium, ComfortTouch
Silicone
Small, ComfortTouch
Silicone
Large, ComfortTouch Gel
Medium, ComfortTouch Gel
Small, ComfortTouch Gel
2
Reattach Forehead Pad to
Forehead Rest and
reassemble Headgear to
Mask for your preferred
configuration.
MODEl
Cushion 9352L-601
Replacement
9352D-601
9352S-601
9352GL-601
9352G-601
9352GS-601
9352LR-601
9352DR-601
9352SR-601
9352GLR-601 Large, ComfortTouch Gel
9352GR-601
9352GSR-601 Small, ComfortTouch Gel
Forehead Pad 9353D-604
& Rest
Headgear 9353D-619
DEsCRIPTION
Large, Silicone
Medium, Silicone
Small, Silicone
Large, Gel
Medium, Gel
Small, Gel
Large, ComfortTouch
Silicone
Medium, ComfortTouch
Silicone
Small, ComfortTouch
Silicone
Medium, ComfortTouch Gel
Includes Buckle & Over-
The-Head Tubing Strap
EN - 7