Removing The Mask; Adjustable Vent; Oxygen/Pressure Port; Care And Cleaning Instructions - DeVilbiss Healthcare FlexSet 9354 Serie Guía De Instrucciones

Removing the mask

1
Remove lower strap from
mask "tusks" and then
disconnect mask from
headgear by pressing Upper
Mask Bridge Levers. nOTE–
If using "Over-the-Head"
Tubing Option (Fig. C): Also
release tubing from Velcro
loop

oxygen/Pressure Port

This is for monitoring pressure during a sleep study or adding oxygen if prescribed by your physician.
1
Remove the oxygen/pressure
port cover and secure your
tubing to this port.

caRE aNd clEaNiNg iNStRuctioNS

Cleaning is recommended on a daily basis.
CaUTiOn–Do not use bleach, chlorine-, alcohol-, or aromatic-based cleaning solutions including scented oils. These
solutions may cause hardening and reduce the life of the product. Do not place tubing in direct sunlight as it may harden
and crack.
WaRNiNg
CHOKING HAZARD. Contains smalls parts. Keep out of reach of children.
1
Disassemble the tubing,
headgear, mask cushion,
and forehead pad.
Weekly Cleaning (if desired): The FlexSet Mask is dishwasher safe if placed in top rack; small components should be
secured. It is recommended that the mask be washed separately. Air dry before use.
EN - 6
2
If you prefer to the leave the
mask attached, simply pull
off Quick Connect from Mask
Elbow. nOTE–If using "Over-
the-Head" Tubing Option
(Fig. C): Also release tubing
from Velcro loop.
WaRNiNg
Oxygen supports combustion. To avoid possible physical injury, do not smoke while
using your CPAP with supplemental oxygen. Do not use near hot sparking objects or
open sources of flame.
2
Wash all of the parts,
including headgear, with
warm water and mild soap.
Rinse thoroughly with warm
water.

adjustable vent

1
Grasp adjustable vent and
rotate to desired position to
change the direction of
airflow exiting exhaust port.
3
Allow parts to air dry.
nOTE–Do not towel dry
parts; this could cause
contamination.
A-9354