RECARO C 6000 DAF XF106 Manual Del Usuario página 56

X
5. Secure the hose/cable harness adapter (2) in place using the edge clips fastened to the hose/cable
harness centrally on the air spring carrier (1) and the seat adapter's rear transverse plate (3).
6. Connect the vehicle's electrical plug (green) (4) to the corresponding connection of the original
hose/cable harness (pink plug).
7. Using the air coupling included in the installation kit, connect the vehicle's air hose (4) to the air hose
of the original hose/cable harness.
8. Slide the vehicle connections into the adapter.
9. Tip the seat carefully back onto the seat adapter.
Important note:
The electrical connections for the seat's power supply (plus / minus) must be established by
specialist. See the circuit diagram in Chapter 5.
Y
10. Fit the cover (1) on the seat adapter.
RECARO Automotive Seating
4
1 Hose/cable harness fastening on seat
2 Hose/cable harness adapter
3 Hose/cable harness fastening
on seat adapter
4. Electrical connection and
air connection to the vehicle
1 Cover
Page 25