Taurus TLV 5555 Manual De Instrucciones página 43

English
7- Controls
P- Programme selector
This control button is used to select the prog ramme which is adequate
a c c o r d i n g t o t h e n a t u r e a n d d eg r e e o f d i r t i n e s s o f t h e c l o t h e s t o b e
washed.To set the prog ramme,operate the ON/OFF button (position out)
and tur n the control in a clockwise direction until the indicating mark
coincides with the chosen programme.
Star ting the washing machine. Once the adequate prog ramme has been
c h o s e n , p r e s s t h e O N / O F F b u t t o n a ga i n ( p o s i t i o n i n ) . T h e m a c h i n e w i l l
s t a r t a n d a u t o m a t i c a l ly c a r r y o u t a l l t h e wa s h f u n c t i o n s u n t i l t h e e n d
of the cycle.The prog ramme control will tur n as the different functions
are car ried out,until it reaches the Stop position.At this point,pres the
ON/OFF button once more (position out) to disconnect the machine from
the power supply and to be able to open the door.
T- Temperature selector
This control button allows the temperature to be chosen for the wash which is most
suitable for the type of fabrics to be washed. A temperature equal to or lower than
that indicated in the program table can be chosen (even cold).To select the
temperature, just turn the button until it is lined up with the corresponding marker.
V- Spin speed selector
this control button allows us to vary the spin speed of the last minutes of each one of
the cotton programmes between 550 and maximum as correspond. In this way, the
machine user can choose the most convenient spin speed for the clothes. To set this
speed, it is only necessary to turn the control button until the corresponding mark
coincides with the desired spin speed.
L- Pilot lamp
When it is lit,indicates that the machine is switched on and that the door locking system is
activated.
In normal washing machines it goes out at the end of each programme and door lock is not
activated.
43