Taurus TLV 5555 Manual De Instrucciones página 38

English
3.3 - Selecting the clothes load
Beffore putting the clothes into the machine, you should:
- Separate the clothes into three lots (cotton, synthetics and wool).
- Within each group, separate the coloureds from the whites.
- Once the clothes have been sorted, put them into the drum of the machine, separately
according to colour and group, loose piece by piece, as per the following proportions:
Cotton maximum 5,5 kg.
Synthetics maximum 2,75 kg.
Wo o l m a x i m u m 1 k g .
3.4 - Selecting the right program
Once the clothes have been sorted into fabric types and colours, you need to select the right
program and temperature. SEE PROGRAM TABLE (Section 8).
3.5 - Starting operation
With the machine now loaded, the door closed, the soap drawer compartments f illed and
the right program chosen, to start the machine, you just need to PULL OUT THE
P RO G R A M M E R C O N T RO L BU T TO N ( P ) O R O N T H E P U S H - BU T TO N ( X ) .
The machine automatically goes through all the operations included in the wash cycle until
it ends.
The wash is now ready to be hung out dry (or to be ironed in the case of washer - dryers).
3.6 - How to get the best performance
3.6-1 - Maximise the load (Section 8)
You obtain the most efficient use of energy, water, detergent and time by using the
maximum recommended load.
You save 50% energy
3.6-2 - Do you need a pre-wash?
Only for deeply stained laundry !.
You save detergent, water, time and between 5 to 15% of energy through not using the
pre-wash for light and anormally soiled clothes.
3.6-3 - Do you need hot water?
Soak or treat stains before the wash, in order to reduce to need to use the hot
programme.
You save 50% energy by using the 60ºC programme.
3.6-4 - For washer-dryers: before using the dryer
Select high (> 850 rpm) for the spin before drying, in order to save energy, water and
time during the drying period.
by washing one full load instead of two half loads.
38