Urmet H.265 Guía Rápida página 41

Step/-/+
Zoom
Step/-/+
Focus
SEMI +
AUTO +
AF MODE
MANUAL
+ OFF
ONE SHOT
/
AF
ON +
TDN AF
OFF
/
LENS INIT
SAVE
POSI +
POWER
OFF +
MODE
WIDE
/
AutoFocus
Manually adjusts zoom (+ zoom in / - zoom out)
Step: defines zooming speed
Manually adjusts focus (+ increase / - decrease)
Step: defines focusing speed
This function is used to customise the camera focusing
mode. Possible options are:
SEMI: focusing is performed only after the zooming
operations are finished.
AUTO: focusing is adjusted automatically.
MANUAL: focusing is adjusted manually.
OFF: focusing and zoom are deactivated. Activate this
option after having adjusted focus and zoom as required.
Function not available.
This function, when activate, allows automatic focus
adjustment at each day -> night or night -> day switch.
This re-initialises the optics and obtained optical
calibration. To be performed when the camera is
installed for the first time and in case of movements
with consequent change of the framed picture.
IMPORTANT: do not use with AF MODE equal to OFF.
This is used to adjust the zoom whenever the camera is
switched back on.
SAVE POSI: this holds the zoom position set before the
camera was switched off.
OFF: do not save the settings stored before switch-off.
WIDE: the camera is switched on in Wide mode.
Adjusts focus automatically
41
EN