Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. Install two self-tapping screws (not supplied) at
a distance of 86.5 mm apart from each other on a
horizontal line.
4. Connect one end of the 8-inch phone cord to the line
jack on the back of the base and connect the other end
to a modular phone jack.
5. Holding the base slightly above the mounting screws
on the wall jack, push the base against the mounting
screws so they are hooked into the left and right
keyhole slots on the back of the phone. Slowly slide
the base down until it snaps into place.
6. Plug the AC power adapter into the electrical outlet.
CAUTION: To reduce risk of personal injury, fire, or
damage use only the adapter provided.
Screw head
Wall
13 – ENGLISH
Tabla de contenido
