Troubleshooting Guide - Nautilus Dol-Fyn AR18 Guía De Uso Y Cuidado

TROUBLESHOOTING GUIDE

PROBLEM
Distiller will not
operate.
Boiler tank does
not fill with water.
Fan does not
operate.
POSSIBLE CAUSE
POWER switch is not
in the ON position.
Boiling chamber not
mounted on lift spring
bracket.
Storage reservoir is full.
Float in reservoir is in the
UP position.
POWER switch is not in
the ON position.
Water connection is not
open.
Inlet water valve is
plugged.
FAN switch is not in the
ON position.
Boiling chamber is not
mounted on lift spring
bracket.
SOLUTION
Make sure that the POWER
switch is in the ON position
and that the unit is plugged
into the wall outlet. Page 5
Remount boiling chamber.
Page 12
Distiller will operate once
a change in water level is
detected. Page 15
Draw sufficient water out of
the reservoir to activate the
float switch.
Make sure that the float
rod is not lodged in its
recessed shipping position.
Page 5
Make sure that the POWER
switch is in the ON position
and that unit is plugged into
the wall. Page 5
Open water connection.
Page 14, step 8
Clean inlet valve and elbow.
Page 17
Make sure that the FAN
switch is in the ON position.
Remount boiling chamber.
Page 12
18