Resol Datalogger DL3 Manual Abreviado página 31

When an SD card with a firmware update is inserted, the enquiry Update? is
indicated on the display.
Î To run the update, select Yes and confirm by pressing button  (see chap. 6
Firmware update with SD card on page 34).
If no firmware update is found on the memory card, the query Copy data? ap-
pears.
Î To copy the data logged in the internal memory, select Yes and confirm by
pressing button ; to cancel the function, select No and confirm by pressing
button .
5.5.7 Network
In the Network sub-menu, the following adjustments can be made:
• VBus.net
• LAN
VBus.net can be used to access the DL3 Datalogger over the Internet without
adjusting the router. In order to activate VBus.net, proceed as follows:
Î Select VBus.net by pressing buttons  and , and confirm with button .
Î Select the menu item Log in and confirm by pressing button .
Î To register the DL3 Datalogger for VBus.net, select Yes and confirm by
pressing button .
Î Select the menu item Log-in code by pressing buttons  and , and confirm
with button .
The DL3 Datalogger generates a 8 - 10 - digit code and registers its address with the
RESOL server. To access the data, a user account at VBus.net is required. In order
to register with the server, proceed as follows:
Î Open a user account at www.vbus.net.
Î Choose a user name and password.
Î Enter the code generated by the DL3 in the user account.
In the LAN sub-menu, the following adjustments can be made for accessing the
Datalogger over LAN:
• Auto configuration
• Address
• Mask
• Recover IP
When Auto configuration has been activated, the IP address and IP net mask
are indicated, but cannot be adjusted. If Auto configuration has been deactivated,
the IP address and IP net mask must be adjusted. In order to make adjustments,
proceed as follows:
Î Select Auto configuration by pressing buttons  and , and confirm with
button .
Î To deactivate Auto configuration, select No and confirm by pressing button .
Î Adjust the IP address by pressing buttons  and , and confirm with button .
Î Adjust the IP net mask by pressing buttons  and , and confirm with button .
The menu item Recover IP can be used to automatically retrieve a new IP address
for the DL3 in the case that the previous one is lost.
In order to adjust the automatic IP address configuration, proceed as follows:
Î Select the menu item Recover IP by pressing buttons  and , and confirm
with button .
Î To activate Recover IP, select Yes and confirm by pressing button .
Now the interval for the automatic IP address configuration can be adjusted. In
order to do so, proceed as follows:
Î Select the menu item Interval by pressing buttons  and , and confirm with
button .
Î Adjust the interval by pressing buttons  and , and confirm with button .
If Recover IP has been activated, the IP address configuration can be carried out
immediately. In order to do so, proceed as follows:
Î Select the menu item Recover now by pressing buttons  and , and confirm
with button .
5.5.8 Erase
In the Erase sub-menu, the following adjustments can be made:
• Erase data
• Reset
The menu item Erase can be used to erase all logged data from the internal
memory of the DL3 Datalogger. In order to erase the data, proceed as follows:
Î Select the menu item Erase data by pressing buttons  and , and confirm
with button .
Î To erase all data, confirm the security enquiry Erase? by selecting Yes and
confirming by pressing button .
31