Step 1 Hardware Connections; Follow The Quick Installation Guide - Belkin N1 Vision Manual Del Usuario

Ocultar thumbs Ver también para N1 Vision:

Tabla de contenido

Idiomas disponibles

Connecting and Configuring your N1 Vision

Step 1 Hardware Connections

Follow the Quick Installation Guide (QIG)

1. Plug the power supply into the wall outlet.

2. Plug the other end into the black port on the N1 Vision.

3. Find the cable connecting the modem and computer**. Unplug it from

the computer and plug it into the yellow port on the N1 Vision.

** If you are replacing an existing router, find the cable connecting

the modem and old router. Disconnect it from the old router

and plug it into the yellow port on your Belkin N1 Vision.

4. Connect the new cable (provided in the box)

to any gray port on the N1 Vision.

5. Connect the other end of that cable to a networking (Ethernet) port on

your computer.

6. Rotate the antennas up.

7. Open a web browser on that computer. The Belkin Router Setup Wizard

should appear automatically. If it doesn't, enter "routersetup" into the

web-address field and press the "Enter" key.

existing cable

new cable from package

back of computer

Tabla de contenido