Setting The Clock; Programming Start/Stop - poolstar POOLEX PLATINIUM MINI Serie Manual De Usuario Y Instalacion

4.3

Setting the clock

Set the system clock to local time, as follows:
M
Step 1: Press to set the time, the hours are blinking.
Step 2: Adjust the hours with the buttons
M
Step 3: Press to switch to minutes.
Step 4: Adjust the minutes with the buttons
M
Step 5: Press to validate and return to the main screen.
4.4

Programming Start/Stop

This function is for programming the Start/Stop timing. You can programme up to 3 different Start/Stop timings. Setting
is as follows:
M
Step 1: Long press 3s to enter into timer functions
Step 2: Select the programme to be configured with the buttons
M
Step 3: Press to programme the start time.
Step 4: Adjust the hours with the buttons
M
Step 5: Press to switch to minutes.
Step 6: Adjust the minutes with the buttons
M
Step 7: Press to programme the stop time.
Step 8: Adjust the hours with the buttons
M
Step 9: Press to switch to minutes.
Step 10: Adjust the minutes with the buttons
M
Step 11: Press to return to the main screen.
4.5 Activating a programme
Once the programme has been defined, it can be activated as follows:
M
Step 1: Long press 3s to enter into timer functions
Step 2: Select the programme to be activated with the buttons
M
Step 3: Keep pressing
M
Step 4: Press to return to the main screen.
The ON/OFF lights indicate an active programme
4. Use
M M
and
M M
and
M
M M
and
M M
and
M M
and
M M
and
M M
until the ON/OFF indicator lights are displayed and start flashing.
.
M
and .
.
.
.
.
and .
20
NB: The remote control
returns automatically to
the main screen after 10
seconds.