Registering The Bluetooth Device (Av Head Unit Only); Setting The Bluetooth Device; (Av Head Unit Only); Deleting A Bluetooth Device From The List - Alpine KCE-350BT Manual De Operación

Registering the Bluetooth Device

(AV Head Unit only)

The Bluetooth device is used when a connectable Bluetooth
compatible device is searched and connected from an AV
head unit, or a new Bluetooth compatible device is registered.
Setting item: DEVICE SEARCH
1
When DEVICE SEARCH is selected,
"SEARCHING..." is displayed, and searching
starts.
2
Touch [:] of a device name to be connected
from the DEVICE SEARCH list.
3
If the adapter is successfully connected to a
Bluetooth compatible device, a paired device
name and a registered number (No. 1 to 4 or
guest mode) are displayed, and then the unit
returns to normal mode.
• If a mobile phone is registered for the first time:
Input a passcode when the numeric keypad screen is
displayed.
• A passcode input on a AV Head Unit is maximum 4-digit. If
a passcode on the Bluetooth compatible device exceeds 4
digits, reset the passcode and make this setting again.
Setting the Bluetooth Device (AV Head Unit only)
To set the KCE-350BT as the BLUETOOTH ADAPTER
1
Press the SETUP Button to and select
SYSTEM SETUP.
2
Scroll down to the BLUETOOTH IN and select
ADAPTER.
To set the [*] button as the phone key
1
Press the SETUP Button and select SYSTEM
SETUP.
2
Scroll down the OPTION KEY and select TEL.

Deleting a Bluetooth Device from the list

You can delete the history of a previously connected
Bluetooth compatible device.
Setting item: CLEAR DEVICE
1
Touch [:] of the Bluetooth compatible device
you want to delete from the CLEAR DEVICE
list.
A message is displayed.
2
Touch [YES] if you want to delete.
• Touching [NO] will cancel the setting.
Controlling from a CD Head Unit / Digital Media
Receiver:
1 Turn the Rotary encoder or the Center jog dial to select
the Bluetooth compatible device to be deleted.
2 Press ENT. (Depending on the connected units, this
operation may not be necessary.)

Setting the Search Mode

You can set whether the KCE-350BT can be recognized or
not from a Bluetooth compatible device. Normally set this to
ON.
Setting item: VISIBLE MODE
Enable recognition of the KCE-350BT from the
ON:
Bluetooth compatible device.
Disable recognition of the KCE-350BT from the
OFF:
Bluetooth compatible device.
• Depending on the mobile phone, you may be necessary to
input passkey (passcode). For a mobile phone's passkey
(passcode) input operation, refer to the mobile phone's
Owner's Manual.

Setting the Received Calls automatically

When a call is received, you can set whether to receive it
automatically or not.
Setting item: AUTO ANSWER
ON: When a call is received, it will be taken
automatically.
OFF: When a call is received, it will not be received
automatically. If a message is displayed and
[YES] is touched when a call is received, you
can receive the call. (When a CD Head Unit /
Digital Media receiver is connected, press
PHONE to receive a call.)
Even if this setting is set to ON/OFF, the received call
•
setting on the mobile phone takes priority.
Object Push Profile (OPP) Contact/Phonebook
Transfer
To PUSH your Contacts to the KCE-350BT using the OPP
1
Enter the Contacts Menu on your phone.
2
Select the Contact that you wish to transfer
to the KCE-350BT.
3
Select the PUSH VIA BLUETOOTH (or similar)
command on your phone.
• For further instructions on how to PUSH contacts via
Bluetooth, please reference your phone's Owners Manual.
5
-EN