Care And Storage - Lanaform Aroma Globe Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
INSTRUCTIONS FOR USE
Characteristics:
• Changing colours.
• 680 ml capacity.
• 3 hours continuous diffusion.
• Easy-fill water tank.
• The water sensor ensures that the device stops automatically when there is not enough water in the tank.
Functionalities:
• Essential oil diffuser.
• Eliminates electrostatic charges.
• Improves the quality of the surrounding air.
How to use it:
• Place the Aroma Globe in the room half an hour prior to switching it on, so that it reaches room temperature.
• Ensure that the diffuser is clean.
• Place the cover (2) on the "water sensor and LED light generator" (3), making sure that the vents are open. (7)
• Place the "water sensor and LED light generator" inside the diffuser. Then place the top for adjusting the power of the
vapour on the cover until it clicks into place. Make sure that the highest part of the top is placed over the highest side of
the diffuser so as to prevent any splashing. See position shown in the diagram. (8)
• Slide the cable linking the "water sensor and LED light generator" inside the Aroma Globe. Bring it out again through
the relevant hole. Make sure to block the hole using the rubber stopper on the cable. (9)
• Fill the tank with the maximum 680ml of fresh water. (The water temperature should not exceed 40°C). (10)
• Pour a few drops of essential oil into the tank. (11)
• Tilt the diffuser as much as possible. The Aroma Globe is then positioned at an angle. (12)
• Plug in with dry hands. (13) The device starts automatically. The vapour and colours that it emits create a relaxing
atmosphere.
Warning:
DESPITE THE SAFETY MECHANISM WHICH STOPS THE TRANSDUCER WORKING, DO NOT LEAVE THE DEVICE
PLUGGED IN WHEN NOT IN USE.

CARE AND STORAGE

If the water has too much calcium and magnesium, it can leave a "white powder" on the device. If this residue collects on
the transducer (the metal disc which produces the ultrasounds) this will prevent the Aroma Globe from working correctly.
We recommend:
1) Using boiled water which has been allowed to cool or distilled water each time,
2) Cleaning the tank every 2 days and cleaning the transducer once a week,
3) Changing the water in the tank every 2 days,
4) Cleaning the Aroma Globe (see instructions below) and making sure that all its components are completely dry when
not in use.
Aroma Globe
EN
5
Tabla de contenido
loading

Tabla de contenido