Operational Principles; Front Panel Layout - Aim TTi TGF4000 Serie Guia De Inicio Rapido

3 - Operational Principles

Front Panel Layout

3. OPERATIONAL PRINCIPLES
Front Panel Layout
Ref. Short Description
1 Power Switch
2 Soft-keys
3 Waveform Keys
4 Waveform Modification
Menus
5 Other Menus
6 Main Sockets
7 Output Keys
8 Cursor Keys and Spin Wheel
9 Numeric Keypad
10 USB Flash Drive
6
Function
Switches instrument on or off. Safety Note: To fully disconnect from
the AC supply, unplug the mains cord from the back of the
instrument or switch off at the AC supply outlet; make sure that the
means of disconnection is readily accessible.
Performs the function shown on the LCD soft-key label above.
Selects the main waveform type (carrier waveform) as active. (Sine,
Square, Ramp, Pulse, Noise/PBRS or Arb.)
Opens menus for setting parameters for Modulation, Sweep and
Burst
Selects menus for internal and external file storage, instrument
utilities, and trigger conditions.
Main output sockets. Channel 2 can also be configured to output
Channel 1 sync from its MAIN OUT 2 socket.
Switch the selected MAIN OUT on or off.
Used to change numeric parameter values digit by digit.
Used to select items within some menus.
Used to enter numeric parameter values directly.
USB Host connector for USB Flash drive storage.
TGF4000 Series Quick Start Guide