Yakima Universal MightyMount Manual Del Usuario página 6

Highroller
HighRoller knob
(HighRoller baseplate)
sPAceR
use sHoRt
cARRIAge bolt*
*Universal MightyMount
WRencH
1033297H - 6/24
REMOVE THE UPPER PAD BEFORE
CONTINUING.
1. Insert the short carriage bolt (from
Universal mightymount), through the
spacer and the HighRoller baseplate.
2. Secure the spacer and baseplate to
the backbone using the HighRoller
knob.
3. Reattach the pad.
4. Attach to crossbar, secure with bail
and wheel.
5. Read warnings on final page!
SPACER POSITION:
if your factory bars are angled, and the spacer
is not flat against the accessory, loosen the
carriage bolt and rotate the spacer on the
MightyMount.
You will need to remove the pad; be sure to
replace it once the bolt is tightened.
BIKE WEIGHT LIMIT:
mAxImUm BIKe weIgHT IS 30 lBS. (14 Kg).
HigHrOller wHeel Tray:
Use the short carriage bolt and
spacerfrom this kit.
CARGO: continued next page...