General Guidelines - Velleman SPACE ROLLER 150 Manual Del Usaurio

• Do not crimp the power cord and protect it against damage from sharp edges. Ask an authorised dealer to replace
the cord if necessary.
• Always disconnect the device from the mains when it is not in use or when you wish to clean it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
• There may be some smoke or a particular smell when the device is activated for the first time. This is normal and
the smell will gradually disappear.
• Do not look directly at the light source. It may cause sensitive people to go into epileptic seizure.
• Note that damage caused by user modifications to the device is not covered by the warranty. Keep the device
away from children and unauthorised users.

3. General Guidelines

• This device is a light effect for professional use on stage, in discos, theatres, etc. It should only be operated with
an alternating current of 230V AC/50Hz. This device is designed for indoor use only.
• Light effects are not designed for continuous operation : regular operation breaks will prolong their life.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a mounting location where the device will be protected against extreme heat, moisture and dust. Respect a
minimum distance of 50cm between the projector and the illuminated surface.
• Always secure the device with an appropriate safety cable (VDLSC7 or VDLSC8).
• Do not use this device in an ambient temperature > 45°C.
• Familiarise yourself with the functions of the device before actually using it. Do not permit operation by unqualified
people. Any damage that may occur will probably be caused by unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• Note that all modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electric shock, lamp
explosion, crash, etc. Using the device in an unauthorised way will void the warranty and may damage the device.
4. Installation
a) The Lamp
• Use the original packaging if the device is to be transported.
• Disconnect the unit from the mains to install or replace the lamp.
• Replace the lamp immediately if it's damaged or deformed.
• Let the lamp cool down before replacing it because the lamp can heat up to 700°C during operation.
• Do not touch a halogen lamp with your bare hands. Use a cloth to insert or remove it.
• Do not install lamps with a higher wattage than that for which the device was designed. Such lamps generate
higher temperatures and may damage the unit.
• Use a 15V/150W EFR GZ6.35 lamp (order code LAMP150/15).
Procedure: 1. Loosen the screws on the bottom of the housing and remove the cover.
2. Remove the old lamp and insert the new one.
3. Close the lid and fix the screws.
Remark: Do not operate the device with an open lid.
VDP150BR3 2 VELLEMAN