Temperature Display; Saving Changes - Peco T190 El Manual Del Propietario

TEmPERATURE DISPLAy

Room Temperature Display: The thermostat displays room temperatures in the range of 50°F to
90°F (10°C to 32°C). Display is in 1°F (0.5°C) increments. The thermostat displays "LO" when
room temperature is below 32°F (0°C). The thermostat displays "HI" when room temperature
is above 99°F (40°C). Temperature updates every 10 seconds. Heating or Cooling operation
remains active when the room temperature is out of range.
Setpoint Temperature Display: In Normal Mode, pressing TEMP will display the setpoint
temperature of the current system mode (HEAT or COOL). After 5 seconds, the thermostat
returns to Normal Mode.
Fahrenheit or Celsius display was configured by the thermostat's installer. To change the
Fahrenheit or Celsius display, refer to the Installation Instructions.

SAVINg ChANgES

As you navigate your thermostat, be aware of the thermostat's save and exit protocol:
• The thermostat automatically saves all the changes you make, as you make them.
• If the thermostat is idle for 60 seconds, the thermostat times out, saves all changes, and returns
to Normal Mode.
• When you are using the PROG, USAGE, D/T or TEMP functions: If you push a button that is not
1