Tabla de contenido
Side Latch
Languette latérale
Pestillos laterales
Removing Belt
Rear Latches
Languette arrière
Pestillos traseros
Base
Base
Base
End Cap
Capuchon d'extréité
Tapa del extremo
Check and remove hair, string and lint
build-up frequently in the Power Nozzle
brush and brush support areas. If
build-up becomes excessive,
disconnect Power Nozzle from wand
and follow the steps below.
➢ Turn off and unplug vacuum cleaner.
➢ Turn Power Nozzle over.
➢ Unscrew the two (2) Power Nozzle
cover screws.
➢ Turn Power Nozzle right side up.
➢ Press handle release pedal and
lower the swivel.
➢ Lift rear latches up.
➢ To remove cover, grasp the sides
and pull out.
➢ Tilt cover forward from back until
front snaps free.
➢ Lift agitator assembly out.
➢ Remove worn belt.
Agitator Assembly
End Cap
- 48 -
Belt Path
End Cap
Agitator
Tabla de contenido
