Installation Procedure; Assembling And Preparing; Unpacking - LG 42UB700T El Manual Del Propietario

10
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

1
Open the package and make sure all the accessories are included.
2
Attach the stand to the TV set.
3
Connect an external device to the TV set.
4
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
• Do not use any unapproved items to ensure the safety and product's lifespan.
• Any damages or injuries by using unapproved items are not covered by the warranty.
• The screens of some models are covered by a thin film. Do not remove it.
NOTE
• The items supplied with your product may vary depending upon the
model.
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width.
• Use an extension cable that supports USB 2.0 if the USB cable or
USB flash drive does not fit into your TV's USB port.
• Use a certified cable with the HDMI logo attached. If you do not
use a certified HDMI cable, the screen may not display or a connection error may occur.
• Recommended HDMI cable types
- High-Speed HDMI
®
- High-Speed HDMI
®
/ Cable
TM
/ Cable with Ethernet
TM
B
B
A
*A 10 mm
*B 18 mm
A