Idiomas disponibles
Idiomas disponibles
(3)
the paper roll under the guide roller. Lift the guide roller. Then, with the printer top cover closed, insert the leading
Pass
edge of the
paper into the rear of the printer.
(Closed condition)
Note : 1: If the upper part of the guide roller is passed, the paper might not be sent as shown in figure below b.
Please pass under the guide roller as shown in a figure.
2: If the direction of the paper roll set becomes upper and lower opposite, the printing face of the paper roll become
opposite and cannot also print as shown in figure below c. Please set the paper as shown in figure a.
Guide roller
Paper roll
(4) Open the top cover, and pull out the leading edge of the paper from the front of the printer. After the set of the paper is
completed, a top cover is closed.
Top cover
Pull out the leading edge of
the paper roll from the front
of the printer.
Paper roll
Guide roller
Top cover
Paper roll
Fig. a
Top cover is opened
_Fig. b
Top cover is closed
Top cover
Paper roll print side
(Surface side)
Fig. c
