Dri-Eaz F515 Manual Del Usuario
Ocultar thumbs Ver también para F515:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

®
The Dri-Eaz
PHD 200 Dehumidifier reduces humidity in enclosed environments by removing water vapor
from the air. The PHD 200 is ideal for crawlspace drying, humidity control and other applications requiring
high-performance dehumidification. (Not intended for professional water damage restoration.)
WARNING
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your unit in any
way. Use only replacement parts authorized by
Dri-Eaz Products, Inc. Modifications or use of unap-
proved parts could create a hazard and will void
your warranty. Contact your authorized distributor
for assistance.
CORRECT PLUG REMOVAL
Grasp IEC plug and pull straight out
IMPORTANT: Damage to IEC receptacle or dehu-
midifier resulting from improper removal of the
power cord is not covered by warranty. The IEC
power cord is a wear item and is not covered by
warranty.
07-01913I F515-115V
Owner's Manual
PHD 200 Dehumidifier
Model F515-115V
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950
Patents: http://www.LBpatents.com
S A V E T H E S E I N S T R U C T I O N S
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
• Inspect the power cord before use. If cord is dam-
aged, do not use. Always grasp the plug (not the
cord) to unplug.
• Insert three-prong plug on power cord into a match-
ing electrically grounded outlet. Do not use adapter.
Never cut off third prong. Do not use an extension
cord.
• The unit must be operated on a 115V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Keep motor and wiring dry.
• Do not attempt to repair the unit. For Authorized
Service Centers, contact Dri-Eaz.
BEFORE YOU BEGIN
Warranty registration
Visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using,
maintaining or servicing your equipment and to contact
you in case we have important safety information con-
cerning your Dri-Eaz product. If you determine service is
required, have your equipment model, serial number and
original proof of purchase available and call your distrib-
utor for assistance with obtaining a return material au-
thorization (RMA).
INTRODUCTION
The PHD 200 Dehumidifier reduces humidity in enclosed
structural environments by removing water vapor from
the air. With proper use, the PHD 200 can help to dry out
damp structural materials, insulation, and contents, and
maintain a healthy level of humidity. Using the PHD 200
may also prevent secondary damage caused by high hu-
midity.
1
Dri-Eaz Products, Inc.
Tabla de contenido
loading

Resumen de contenidos para Dri-Eaz F515

  • Página 9: Adecuado Retiro Del Enchufe

    Manual del usuario Deshumidificador PHD 200 Modelo F515 DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233 Teléfono: 800-932-3030 Fax: 360-757-7950 ® El deshumidificador Dri-Eaz PHD 200 reduce la humedad en ambientes cerrados al eliminar el vapor de agua del aire. El PHD 200 es ideal para el secado espacio de acceso, control de humedad y otras aplica- ciones que requieren deshumidificación de alto rendimiento.
  • Página 10 (CA), la pantalla del pa- nel de control mostrará brevemente una serie de lectu- ras en ciclo. Esto es parte del procedimiento de auto- diagnóstico de la unidad y no se requiere ninguna inter- vención del usuario. 07-01913I F515-115V Dri-Eaz Products, Inc.
  • Página 11: Guía Del Panel De Control

    HORAS) y alternará entre INLET XX°F (ENTRADA XX° F e INLET XX% (ENTRADA XX%). NOTA: Si no apa- rece ninguna cuenta regresiva de retardo del compresor, el retardo no es necesario y la máquina comenzará a funcionar de inmediato. 07-01913I F515-115V Dri-Eaz Products, Inc.
  • Página 12: Ajustes De Usuario

    13. TOTAL DE HRS XXXX HR (Regresa al elemento del menú superior). La siguiente sección está disponible sólo en las unidades equipadas con sistema inalámbrico. 14. SENSOR ID XXXXXXXX (Regresa al elemento del menú superior). 07-01913I F515-115V Dri-Eaz Products, Inc.
  • Página 13: Empleo Deshumidificador En Mo- Vimiento

    3. Pulse la tecla de PURGADO . Cuando se purgado, asegúrese de que la unidad esté en posición complete el ciclo de purgado, apague la unidad. vertical sobre una superficie horizontal. 07-01913I F515-115V Dri-Eaz Products, Inc.
  • Página 14: Programa De Mantenimiento

    • Asegúrela durante el transporte para evitar desliza- mientos y posibles lesiones a los ocupantes del Limpie la válvula de retención y el depósito de la vehículo. bomba. Si la unidad muestra el mensaje ER9 BOMBA 07-01913I F515-115V Dri-Eaz Products, Inc.
  • Página 15: Botón De Purga De La Bomba

    Segunda línea: Alterna cada 2 segundos entre la temperatura de entrada y la humedad relativa de entrada. BAJA TEMP F515 únicamente. La unidad se apaga si la temperatura de Ninguna ENTRADA XXX°C/ XX% entrada está por debajo de los 45 °F. Se vuelve a encender cuando la entrada alcanza los 50 °F.
  • Página 16: Mensajes De Error

    Compruebe si hay obstrucciones en la manguera de desagüe. Revise la bomba. Com- ER9 BOMBA TAPADA pruebe la altura de la manguera de desagüe. No debe estar a más de 3 pies del fondo BOMBA&MANGUERA de la unidad. 07-01913I F515-115V Dri-Eaz Products, Inc.
  • Página 17: Detección De Problemas

    Manguera de desagüe de 20 pies (6 m) con conexión Deshumidificador PHD 200 Nombre de acoplamiento rápido. modelo F515 Cable de alimentación extraíble de 6 pies (1.8 m). Dimensiones (ancho x alto x 12.5 × 17.6 × 21.5 cm 1 filtro de aire desechable (reordenar F527 3 filtros) fondo) 31.8 ×...

Tabla de contenido