Paper Handling; Paper Handling Configuration; Adjust Paper Tension In Rear - Genicom 38XX Serie Una Guía Rápida De Referencia

PAPER HANDLING

Paper Handling Configuration

Fully Attended
Semi-Attended
Adjust Paper Tension in Rear Paper Path
Quick Reference Guide
Instead of using the UP ARROW key to adjust the same amount of
offset each time a particular form is loaded, that offset can be
stored in a parameter called top print reference and saved to a
format. If a top print reference is saved, paper will advance to the
right place each time that paper path is loaded. See "Set a Top
Print Reference", in Chapter 8 of the 3870 User's Manual.
Use the bottom paper path for thick, or heavy, hard-to-feed
forms. Use the rear path for forms that are easiest to feed.
Pedestals, racks, and baskets shown below are available from the
printer representative or supplier.
Tear Off
Every One
or Two
Sheets
Paper
Rack
Basket
Paper Handling Configurations
The printer is shipped with the paper tension set to the minimum
setting. This works for most continuous forms. The paper tension
may need to be adjusted for:
•
Multipart forms
•
Heavy paper or card stock
•
The manual paper path
18
Unattended
Paper
Tear Off
Every
One or
Two
Sheets
Paper
Rack
Paper
Shelf
Pedestal
GEK-89604