Cardin TXQ504C2 Manual Del Usuario página 27

To modify the value, enter the CONNECTION menu, select the value and press . Using the
ENT
buttons scroll through the settings until the desired value appears on the display.
Press the button to confirm the selection, this will be saved in memory and immediately activated.
ENT
Press to cancel the procedure and return to the CONNECTION menu without changing the settings.
ESC
MENU: M.A.C. (only with a WiFi card)
Use this function to obtain the device's MAC (Media Access Control address) number. MAC is a 12 digit
hexadecimal number identifying the device on the network it is currently operating on. Multiple devices with
the same MAC number do not exist. To display the number press then press to exit the function.
ENT ESC
MENU: ACTIVATION (only 2G/3G cards)
This setting allows global channel activation by means of direct dialing. If you choose ENABLED, a telephone
call by a number that is present in the address book will be able to activate the enabled outputs. If you
choose DISABLED activation via direct dialling will be disabled and the outputs can only be activated via
a radio command or an SMS.
The numbers present in the address book will simultaneously activate all the channels that have been
associated with them in the address book.
The channels have the following acronyms: "CHA", "CHB", "CHC", "CHD". For example, If you wish to
activate the channels A-B and D simultaneously the following acronym: "CHACHBCHD" should be inserted
into the number field.
Attention! Direct association of the telephone number to the receiver only allows you to set one channel.
The other channels can be added by modifying the SIM address book using a normal telephone apparatus.
To modify the value go to the ACTIVATION menu and press .
ENT
Using the buttons scroll through the settings until the desired value appears on the display. Confirm
the value on the display by pressing which will save it in memory and make it immediately available.
ENT
To cancel the operation press and you will be returned to the ACTIVATION menu without saving the
ESC
modification.
MENU: W.P.S. (only with a WiFi card)
Using the WPS (Wi-Fi Protected Setup) function it is possible to associate the receiver with a WiFi network
without knowing the credentials . The network needs to have this option available and activated simultaneously
with the device. Pressing the button to activate this function and the receiver will wait for confirmation
ENT
to before activating the network scan.
Activate the WPS procedure on the router you want to associate the device with and after a few seconds
press the button on the receiver to start the network scan. Wait for the completion of the procedure
which will terminate anyway after 2 minutes has elapsed. If you have successfully associated the device
"UPDATED" will appear on the display, the WiFi card will be restarted and the device will connect to the
network ([WF] will appear on the display). The receiver will store the credentials for the new network which
will then be used each time you need to associate the two. If you fail to associate the device "E06-SYSTEM"
will appear on the display and the card will restart.
MENU: SIM ADDRESS BOOK
This menu contains the SIM address book management functions which are used to memorise the numbers
of the user who can direct dial or activate a data connection. The maximum number of users depends on
the capacity of the SIM.
The SIM address book management functions are:
• INFORMATION: when you press the display will visualise the data regarding the free memory
ENT
locations and the overall capacity of the SIM Telephone card's address book.
27