Accessory Kit - Federal Signal LWMB2 Instrucciones De Instalación

Ocultar thumbs Ver también para LWMB2:
Idiomas disponibles

Idiomas disponibles

2. Using the adapter plate as a template, scribe four drill position marks on the mounting
surface (use four corner holes).
3. Drill appropriate size holes, at the previously scribed marks, and install suitable
anchors (customer supplied).
4. Remove the
/
1
2
the plug with a
5. Assemble the threaded bushing to the light base. Figure 2 illustrates the proper bushing
orientation for all applicable models. Assemble the two set screws to the mounting bracket.
6. Feed the wires, protruding from the base of the light, down through the hole at the top of the
mounting bracket (neck of pipe flange). Insert the light down into the mounting bracket neck
and tighten both set screws securely.
7. Feed the wires, now at the rear of the mounting bracket, through the
(installed in step 4).
8. Attach the mounting bracket and light assembly to the wall with
screws (supplied) Insure that the backplate is positioned behind the mounting bracket flange
as shown in figure 3.
Electrical splices must be made within a condulet box (customer supplied).
9. Using the length of leads extending out of the
length of conduit necessary for the installation. Ensure that an adequate length of wire is left
to make splices in the condulet.
10. Install conduit and condulet. Connect supply source wires to light wires at condulet.
D. Kit Contents List.
Qty.
1
1
1
2
2
4
4
4
1
1
1
- inch plug from the threaded hole at the base of the mounting bracket neck. Replace
/
-inch conduit fitting (not supplied).
1
2
Description
LWMB2
Mounting Bracket, Wall
Backplate

ACCESSORY KIT

Plate, Adapter
Screw, 8-32, Rd. Head
Screw, Set, Hex, Socket,
Screw, Machine,
/
1
4
Screw, Thd.Frm., Pan Hd.
Screw, Truss Head, 6-32
Instruction Sheet
Bushing, Threaded
Bushing, Reducer
NOTE
/
-inch conduit fitting as a guide, determine the
1
2
/
-20
1
4
-20 x 1-
/
"
1
4
-2-
/
- 20 mounting
1
4
/
-inch conduit fitting
1
2
/
-20 x 1-
/
-inch machine
1
1
4
8
Part Number
K8459B089
K8459B098
K8459C090
K7000A061-20
K7008A021-04
K7000A074-20
K7011A114-12
K7000A450-06
8459A093E
K8459109
K8459108
loading