Product Specifications; Parts & Features - Powermate PWSTMEA Manual Del Operador

Product Specifications

• Save all instructions
UNIT WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 pounds (4 kg)
CUTTING DEPTHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-2 .5 inches (0-63 mm)
BLADE DIAMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 inches (203 mm), 2 point
BLADE CENTER HOLE DIAMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .0 inches (25 .4 mm)
ENGINE IDLE SPEED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,000 + / - 300 RPM
GEAR BOX LUBRICANT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lithium Complex Moly Grease NLGI 1 or NLGI 2
Parts & Features
• Save all instructions
4
DEPTH CONTROL KNOB - Knob on left side which when loosened allows the depth wheels to be adjusted and
1 .
thus controls the cutting depth of the blade .
SHAFT TUBE - Connects the Edger attachment to the power unit . A splined shaft is located inside .
2 .
3 . WHEELS - Supports and regulates the height of the cutter head and blade .
BLADE - Rotates at high speed to cut vegetation next to sidewalks and curbs . Use extreme caution when
4 .
the blade is in motion .
BLADE GUARD AND FLEXIBLE DEFLECTOR - Encloses the blade to prevent objects from being discharged
5 .
towards the operator . Always keep these in place .
Assembly
• Save all instructions
Read and follow the assembly instructions . Do not discard any parts or materials until the unit is assembled . References
to the right or left side of the Edger are from the viewpoint of the operator's position behind the Edger.
WARNING
Do not operate Edger if it is damaged or not completely and correctly assembled . Before doing any assembly or
maintenance to the unit, remove the wire from the spark plug . Always wear ANSI compliant safety glasses with side
shields while assembling the Edger .
Questions? Call Toll Free at 1-800-737-2112
5 1
EN-5
If you need assistance or find any parts missing,
CALL TOLL FREE: 1-800–737-2112
2
3
If you need assistance or find any parts missing,
CALL TOLL FREE: 1-800–737-2112
Copyright © 2018 MAT Engine Technologies, LLC