Alarm Management - Giacomini K492DY012 Manual Del Usaurio

K492DY012

6.6 - ALARM MANAGEMENT

You can associate the status of digital input 1 (open, closed, not connected) to a particular
action of the two output relays (for example: shut off the entire system=relay 1 and relay
2 OFF). When that condition occurs, the display also shows the words "INPUT: ALR O/C
(Open or Close)".
Please note: relay 2 is always OFF in winter.
12:01 01-01-18
1
23.0
1
off
ADV. PROG.
2
LIGHT ON 15S TMP LCK:ON
LIGHT INT S CORRECTION
DAY SAV YES DIFF: STD
TA = 5.0 CELSIUS
RH = 57% ITALIAN
ALR: OPEN RESET YES
CHG O: INP CH140 V1.0
DEW PNT: ON
Note: programming can only be done in OPEN or CLOSE conditions by pressing the PROG
key.
RELAY 1: ---
3
RELAY 2: ---
4
WEEKLY PROGRAMMABLE THERMOSTAT
LIGHT ON 15S
2s
■ --- = action disabled
■ OFF = if an alarm condition occurs, the relay goes to OFF
PRESS
■ ON = if an alarm condition occurs, the relay goes to ON
Note: relay 2 only works in SUMMER mode.
■ --- = action disabled
PRESS
■ OFF = if an alarm condition occurs, the relay goes to OFF
■ ON = if an alarm condition occurs, the relay goes to ON
alr: open
PRESS
-----
oPEN
x5
CLOSE
PRESS
26