Power Sources; Battery Power - Roadstar TRA-300D+ Manual De Instrucciones

1 English
LOCATION OF CONTROLS
1. SPEAKER
2. DAB+/FM
3. LCD DISPLAY
4. INFO/MENU
5. BACK
6. SCAN
7. ENTER
8. ◄► (FORWARD/BACK)
9. PRESET
10. PRESET LOCATIONS 1-10
11. VOLUME+/-
12. SLEEP/TIMER/ POWER
13. POWER ON/OFF SWITCH
14. DC POWER
15. EARPHONE OUT
16. BATTERY COMPARTMENT
PRECAUTION
•
INSTRUCTIONS - All the safety and operating instructions should be read before the
radio is operated. The manual should be retained for future reference.
•
HEED WARNINGS - All warnings on the appliance and in the operating instructions
should be adhered to.
•
WATER AND MOISTURE - The appliance should not be used near liquids or in rooms
with a high level of humidity.
•
VENTILATION - The appliance should be situated so that its location or position does
not interfere with its proper ventilation.
•
HEAT - The appliance should be situated away from heat sources such as radiators,
stoves or other appliances that produce heat.
•
POWER SOURCE - The radio should be connected to power supply only of the type
described in the operating instructions or as marked on the appliance.
•
POWER CORD PROTECTION - Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon/against them.
•
OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through openings.
•
SERVICING - The user should not attempt to service the appliance beyond that descri-
ve in the user operating instructions. All the servicing should be referred to qualified
service personnel
Note: If the display does not function properly or no reaction to operation of any control may
due to the electrostatic discharge. Switch off and disconnect the power cord and remove all
the batteries, then turn the power back on after a few seconds.

POWER SOURCES

AC POWER: You can power your portable stereo system by plugging the AC/DC adaptor
into the DC plug (14) at the back of the unit and into a wall AC power outlet.
Check that the rated voltage of your appliance matches your local voltage.
BATTERY POWER: To use the radio with batteries, disconnect the AC/DC adaptor and in-