Technical Data; Eu Declaration Of Conformity - Chicago Pneumatic CP12CHA 12V AUS Manual Del Operador

Charger

Technical Data

Technical data
Voltage (V)
Quick Charge current (A)
Weight (g)
Recommended ambient charging tempera-
ture (°C)
Voltage input : 220-240V 50/60Hz for Europe; 220-240V
50Hz for ANZ; 120V 60Hz for US, 220V 60Hz for Korea.
Mains connection : Plug type A for US; type C for EU and
Korea; type I for Australia.
Declarations

EU DECLARATION OF CONFORMITY

We, CHICAGO PNEUMATIC Tool Co. LLC, 1815 Club-
house Road, Rock Hill, SC 29730, declare under our sole re-
sponsibility that the product (with name, type and serial
number, see front page) is in conformity with the following
Directive(s):
2011/65/EU (RoHS), 2014/30/EU(EMC), 2014/35/
EU(LVD)
Harmonized standards applied:
EN 60335-1:2012+A11:2014+A13:2017; EN
60335-2-29:2004+A2:2010+A11:2018; EN62233:2008; EN
55014-1:2017; EN 55014-2:2015 EN 61000-3-3:2013; EN
61000-3-2:2014
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain,
Pascal ROUSSY
Signature of issuer
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
Safety
DO NOT DISCARD - GIVE TO USER
12
4
460
+ 5 .... +40
www.P65Warnings.ca.gov
© Chicago Pneumatic - 8940172296
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
product.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.
Safety instructions
Do not dispose of used battery packs in the household refuse
or by burning them. CP Distributors offer to retrieve old bat-
teries to protect our environment. Do not store the battery
pack together with metal objects (short circuit risk). Use only
System CP chargers for charging System CP battery packs.
Do not use battery packs from other systems. The following
battery packs can be charged with this charger:
Voltage Battery Cell type
12V CP12XP Li-Ion
Do not try to charge
non-rechargeable
batteries with this
charger
. No metal parts must be allowed to
enter the battery section of the charger (short circuit risk).
Never break open battery packs and chargers and store only
in dry rooms. Keep dry at all times. Do not touch the tool
with conducting objects. Never charge a damaged battery
pack. Replace by a new one. Before use check machine, ca-
ble, and plug for any damages or material fatigue. Repairs
should only be carried out by authorised Service Agents.
Capacity No. of Bat-
tery cells
<=1.5Ah 3
5