Extension Cords; 120V - Clarke FM-1700HD Libro De Instrucciones

Figure 5
Figure 5a
Figure 5b
Page 12
120 VOLT MACHINES
Instructions for connection to the power supply and
the electrical ground.
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electrical shock. This prod-
uct is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be inserted into
an appropriate oulet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING: Improper connection of the equip-
ment-grounding conductor can result in a risk of
electric shock. Check with a qualifi ed electrician
or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify
the plug provided with the product - if it will not
fi t the outlet, have a proper outlet installed by a
qualifi ed electrician.
This product is for use on a nominal 120 volt circuit and has
a grounding attachment plug that looks like the plug illustrated
in Fig. 5. Make sure that the product is connected to an outlet
having the same confi guration as the plug. No adaptor should
be used with this product.
WARNING: To prevent possible electric shock,
protect the machine from rain. Keep the machine
in a dry building.
WARNING: To prevent possible electric shock,
always use a 3-wire electrical system connected
to the electrical ground. For maximum protection
against electrical shock, use a circuit that is pro-
tected by a ground fault circuit interrupter. Con-
sult your electrical contractor.
WARNING: Do not cut, remove or break the
ground pin. If the outlet does not fi t the plug, con-
sult your electrical contractor.
WARNING: Have worn, cut or damaged cords re-
placed by an authorized service person.

EXTENSION CORDS

Use only an approved extension cord with three conductors,
a plug with three terminals, and a connector body with three
holes. The machine has a power cord with wire size 14 AWG
(AWG means American Wire Gauge).
WARNING: If you use an extension cord, use an
extension cord with minimum wire size 12 AWG.
Do not use an extension cord longer than 50 feet.
Do not join two extension cords.
Clarke ® Operator's Manual FM-1700HD HDTR