Temperature Option; Configuration Via The Clock (Buttons) - Gorgy Timing LEDI Guia Del Usuario

Ocultar thumbs Ver también para LEDI:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3.2.8. temperature option

Connect the temperature sensor on the both terminal marked : Probe t°C of the
terminal (no polarity).
temperature probe is provided with a 4 meters cable, this cable might be extended
(25 meters length maxi.)
In case of an indoor temperature display, the sensor must be placed
between 1.5 to 2 meters from the ground and as far as possible from any
In case of an outdoor temperature display the sensor must be placed
under a ventilated shelter, to avoid the influence of solar radiation.
In case of a pool temperature display, the sensor must be placed below
In wireless version, the radio transmitter must be placed out of
the water. 1000m maximum distance of transmission (and depends of
all settings are made using the 3 buttons '+', '-' and
'PROG' at the back of the product.
You can scroll quickly by holding down the push-
buttons.
to exit a menu, just hold down the 'PROG', button
or leave the buttons inactive for more than 70 se-
conds.
You can adjust the display brightness, without going
to the menu, by pressing the buttons '+' and '-'.
You cannot make advanced settings from the timer.
MDE-LEDI-1099V3.2
heat source.
Beware greenhouse effects
the surface of water.
environnement, see ANNEXE 1)
4. COnFIGURatIOn
VIa tHE CLOCk (BUttOnS)
OFF
ON
+
-
PROG
61

Hide quick links:

Tabla de contenido
loading

Este manual también es adecuado para:

Ledi reverso

Tabla de contenido