Radio-Synchronized By Tdf, Dcf Or Gps Receiver Version; Dcf 24V Wired Version; Versions Ascii Rs232 Ou Rs485; Smpte Version - Gorgy Timing LEDI Guia Del Usuario

3.1.2. Radio-synchronized by tDF, DCF or GPS receiver version

► Connect tDF, DCF or GPs antenna on the inputs CODE of plug-in terminal (no
polarity).
☛
To position your antenna, please refer to instructions on antennas
CDG020/021 or web site www.gorgy-timing.fr section user manual.

3.1.3. DCF 24V wired version

► Connect DCF input to the terminal – and +
☛
Pay attention to the correct
polarity: wiring mistakes may cause

3.1.4. Versions aSCII RS232 ou RS485

► Connect asCii Rs232 or Rs485 signal on the plug-in terminal according to table
below:
aSCII 1 terminal
BaSCII 2 terminal
GnD terminal
► after connecting the asCii code, press the "reset" button on the back of the product.

3.1.5. SMPtE Version

► Connect smPtE signal on the terminals "aSCII" and "GND".

3.1.6. ntP Version

► Connect Ethernet cable on Ethernet port located at rear panel of the product.
58
usermanual "MDE-ANTENNES-0085" available on:
severe damages.
aSCII RS232C
Attention to DCF code polarity
Attention polarité code DCF
Achtung: DCF Code Polarität Atención con la polaridad del código DCF
txD
RxD
GnD
ASCII
232/485
aSCII RS422/485
E / S -
E / S +
GnD
MDE-LEDI-1099V3.2