Using On Slopes; Transporting - EMAK EF63C/6,5M Manual Del Operador

HOW TO USE THE MACHINE

5.5 USING ON SLOPES

When mowing lawns on a slope, observe
the maximum gradients already men-
tioned (max 10° - 17%) and move up and
down but never across them. Take great
care when changing direction that the
highest wheels do not hit obstacles (such
as stones, branches, roots, etc.) that may
cause the machine to slide sideways, tip
over or otherwise cause loss of control.
DANGER!
!
SLOPES. Never use reverse to reduce speed going downhill: you may
lose control of the machine, particularly on slippery surfaces. Never ride
the machine on slopes in neutral or with the clutch out! Always engage a
low gear and the parking brake before leaving the machine at a stopped
and unattended.
WARNING!
!
ground to prevent the risk of tipping up.
Reduce the forward speed before going on a slope, particularly downhill.

5.6 TRANSPORTING

WARNING!
!
suitable equipment for lifting and an appropriate number of people for the
weight involved and the type of lifting system used. The machine must
never be lifted by rope and tackle. During transport, lower the cutting
deck, engage the parking brake and fasten the machine securely to the
hauling device with ropes or chains.
SLOW DOWN BEFORE CHANGING DIRECTION ON
Take care when beginning forward movement on sloping
If the machine is transported on a truck or trailer, use
max 10° (17%)
EN 25
RIGHT!