Festo CPV GE ASI-8E8A-Z M8 Serie Manual Del Usuario página 28

3.7 Connection example of valve terminal type 10
1
AS−Interface master
2
Festo combi power
pack
3
Load voltage can
be switched off
3.8 Converting the valve terminal
The CPV valve terminal can be fitted with single−solenoid
valves and/or double−solenoid valves. For conversion, the
new valve terminal configuration must be set on DIP
switches on the bottom of the electrical sub−base.
1
DIP switch 1:
Valve locations
1 to 4 (slave 1)
2
DIP switch 2:
Valve locations
5 to 8 (slave 2)
Instructions on loosening the electrical sub−base can be
found in the pneumatics manual. The permitted valve com
binations as well as the relevant DIP switch settings can be
found in the table in section 3.4.
28
1
2
3
1
Festo CPV..−GE−ASI−8E8A−Z M8 0306c English
0 1 2 3 4 5 6 7
2