RIB TOUCH Wi-Fi Manual Del Usuario página 16

G
B
1 - Unscrew fastening screws of upper
cover and remove it (fig. 2 - part. 1).
- Unscrew gland bolts from upper part
(fig. 3).
- Remove upper part complete with the
adjacent electronic board(fig. 4).
- Remove plastic guide from notches
(fig. 5-6).
- Insert 3 alkaline type AA with
batteries 1.5V and pay attention to
the polarities (fig. 7).
- Insert plastic guide into notches fig.
8).
- Identify and memorize electronic
board as indicated below.
- Insert electronic card with mechanical
assembly into rubber profile (fig.
9-10-11).
- Insert steel cable into appropriate slot
on mechanical assembly (fig. 12).
- Lock mechanical assembly
aluminum profile using
loosened previously (fig. 13).
- Insert steel cable into slot located on
lever (fig. 14).
to
screws
3
5
7
16
16
2
4
6
8