Attaching The Projector Plate - KlipXtreme KPM-610B Manual De Instalación

Step 4
Step 4
Two M6x45mm screws
M6x40mm security
screws

Attaching the projector plate

Step 1
Thread the selected hardware into each mounting point of the projector, making sure to use the
correct screw size.
Step 2
Identify the projector's approximate front-to-back center of gravity. Place your hands on each side
of the projector and gently lift it an inch from the surface on which it is resting. Carefully adjust
your grip on the projector until it seems balanced from front-to-back.
Make a mental note of center of gravity.
Identify the projector's approximate side-to-side center of gravity. Place your hands on the front
and back of the projector and gently lift it an inch from the surface on which it is resting. Carefully
adjust your grip on the projector until it seems balanced from side-to-side. Make a mental note