Maintenance; Battery; Low Battery Signal; Replacing The Battery - Riester ri-champion smartPRO Instrucciones De Operación

MAINTENANCE

BATTERY

Your meter comes with four (4)1.5V AA size alkaline batteries.

Low Battery Signal

The meter will display either of the two messages below to alert you when the
meter power is getting low.
1. The
2. The

Replacing the Battery

To replace the batteries, make sure the meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old batteries and replace with four 1.5V AA size alkaline batteries.
3. Close the battery cover.
NOTE
• Replacing the batteries does not affect the test results stored in memory.
• As with all small batteries, these batteries should be kept away from small
children. If swallowed, promptly seek medical assistance.
• Batteries might leak chemicals if unused for a long time. Remove the batteries
if you are not going to use the device for an extended period (i.e., 3 months
or more).
• Properly dispose of the batteries according to your local environmental
regulations.
symbol appears along with display messages: The
meter is functional and the result remains accurate, but it is
time to change the batteries.
symbol appears with E-b:
The power is not enough to do a test. You must change the
batteries immediately.
15