Moretti LEM Aspimed 2.2 Manual De Instrucciones página 18

•
Connect the power cord to the device then connect the plug to the electrical mains supply.
•
Push switch on position I to start suction.
•
Unscrew the lid of the jar and fill the jar 1/3 full or ordinary water (this assists the unit to reach peak vacuum performance and
makes clean-up easier) then re-screw the lid on the jar correctly.
•
During operation the jar has to be in vertical position to avoid overflow valve to cut off aspiration. Should this happen, switch off
the device and disconnect the tube from the jar cover (from "VACUUM" outlet).
•
Once finished push switch on O position and unplug.
•
Remove the accessories and clean.
PATIENT Port
VACUUM Port
MAKE SURE THAT CHILDREN AND/OR MENTALLY ILL PEOPLE DO NOT USE THE DEVICE WITHOUT ADULT SURVEILLANCE
NEVER USE THE DEVICE WITHOUT JAR AND / OR PROTECTION FILTER
18
Antibacterial
Filter
Vacuum Indicator
(kPa / Bar)
Vacuum regulator
knob
ON/OFF Switch