Door Panel Installation - OVE SYDNEY 60 Manual De Instrucciones

1. Install the 2 top rollers (K) on the door glass panel (C). Use a ratchet to strongly tighten the blots.
2. Insert the door bottom seal strip (L) onto the door panel (C).
3. Gently hang the door panel by its 2 top rollers on the support bar (D) and make sure to place the bottom of the door
inside the guide (E).
4-5. Once all adjustments have been made, drill the fixed panel (A) with Φ 3mm (1/8in) in 3 places, secure the wall
track (B) using screws (AA), fittings and caps (FF).
6-7. Install the 2 glass panels seal strips (F). Cut the top surplus part with a cutter so that the rollers do not hit the seal
stip when opening the door. Install the door's vertical seal strip (G) on the closing end.
8. Position the 2 roller stoppers (M) in order to block the door panel (C) from hitting the walls either when opening it or
closing it. Use the Allen key to strongly secure the stoppers when their final position is found.
9. Install the 2 bottom rollers (K) on the door glass panel (C).
Note: Adjust the 4 rollers to ensure proper closing of the door. Then use a ratchet to strongly tighten the bolts.
10. Using silicone, install the decorative metal track (J) in front of the door panel. Slide the decorative end caps (LL)
onto the track (J).

DOOR PANEL INSTALLATION

5
AA
FF
8
M
C
1
HH
JJ
3
C
E
6
F
A
9
HH
JJ
12
2
K
C
4
A
Φ3mm
1/8in
7
C
10
J
K
C
C
L
G
LL