AVM Fritz!!Powerline 546E Instalación Y Operación página 13

Extending a Wireless LAN Network
Here is how to use FRITZ!Powerline 546E as a WLAN repeater.
1. Start a web browser and enter
FRITZ!Powerline 546E user interface opens.
2. Open System/Operating Mode and click Change Operating Mode.
3. Select WLAN Bridge and click Next. A Wizard starts to guide you through the
confi guration process.
4. Click Finish.
5. If FRITZ!Powerline 546E is connected with your router via a powerline or LAN
connection, clear this connection.
FRITZ!Powerline 540E may be connected with your router
or wirelessly.
6. Connect your wireless LAN and network devices with FRITZ!Powerline 546E.
WLAN
24
fritz.powerline in the address line. The
either with a
WLAN
ower ecurity
Status Display and Operation
You can operate FRITZ!Powerline 546E manually using the three buttons.
On/Off
LAN cable
on socket is switched on
disabled socket is switched off
press briefl y Switching the socket on and off
for factory settings, press and hold at the same time as
on WLAN function is enabled
fl ashing WPS quick connection in progress
disabled WLAN function is switched off
press briefl y Switching the WLAN function on and off
press long Starting a WPS quick connection
on Connected in the powerline network
fl ashing Connecting or not in the powerline network
disabled Powerline is switched off on the adapter
press briefl y Switching powerline on and off
press long Integrating FRITZ!Powerline safely into an existing powerline
network
25