Profibus Message Mapping - Agilent Technologies Turbo-V 2K-G Serie Manual De Instrucciones

Profibus Message Mapping

Tab. 12 Parameter buffer (17 bytes)
Offset Size
Unit Res
Byte Byte
0 1 °C
1 1 °C
2 1 %
3 1 °C
4 1 Sccm
5 2 -
7 2 Hz/mA/s
9 2 s
11 2 0.2*s
13 2 0.2*s
Turbo-V 2K-G Pumping System User Manual / 87-900-968-01
Range Description
15-35 Water Cooling Max Temperature
Enter here the max temperature you foreseen for your
cooling system, this value will set the maximum power
provided to the pump (see Input Buffer byte-4)
1-5 Water Cooling Hysteresis
Set here the hysteresys on water cooling measurement
(default=1, don't change if not necessary)
1-99 Setpoint Hysteresis
Set the hysteresis on set point output (see set point out
paragraph)
- Heather Jacket Temperature Setting
Specific option, not available on standard models
- Flowmeter Threshold
Specific option, not available on standard models
- Reserved
- Setpoint Value
Set the threshold for the set point out
0- Setpoint Mask Time
99999 Set the time during the controller does not drive the set
point out
0- Vent Valve Opening Delay
65535 Set the delay time between the stop command and vent
0 = inf. opening. Valid only in "purge/vent auto mode"
(Parameter Buffer byte-15 B1=0); default = 15;
0 = infinite (the valve will never open)
0- Vent Valve Open Time
65535 Set how long the vent will remain open, then both purge
0 = inf. and vent will be closed. Valid only in "purge/vent auto
mode" (Parameter Buffer byte-15 B1=0); 0 = infinite
(the valve remain open till a start command)
Technical Information
Profibus Message Mapping
(G)
17
Win
Serial
158
159
105
113
115
-
102
103
126
147
349/372