Preface; Introduction; Identification Of The Product; General Description - PLYMOVENT TEV-385 Instrucciones Para El Uso

pREFacE

using this manual
This manual is intended to be used as a work of reference for
professional, well-trained and authorised users to be able to
safely install, maintain and repair the product mentioned on
the cover of this document.
pictograms and symbols
The following pictograms and symbols are used in this manual:
Tip
Suggestions and recommendations to simplify
carrying out tasks and actions.
aTTENTiON!
A remark with additional information for the user.
A remark brings possible problems to the user's
attention.
waRNiNg!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
waRNiNg!
Denotes risk of electric shock.
waRNiNg!
Important warning to prevent fire.
Text indicators
Listings indicated by "-" (hyphen) concern enumerations.
Listings indicated by "•" (bullet point) describe steps to
perform.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. Make sure you have the
following specifications at hand:
- product name
- serial number
These data can be found on the identification plate.
1

iNTRODucTiON

1.1

Identification of the product

The identification plate contains, among other things, the
following data:
- product name
- serial number
- supply voltage and frequency
- power consumption
1.2

general description

The TEV fan is used for central extracting systems extracting
exhaust gases as well as fumes and gases which are released
during the most common welding processes.
1.3

product combinations

The fan can be used with all filter units, and all fume
extraction and exhaust extraction systems.
0000100437/010812/0 TEV-RANGE
1.4

Options and accessories

The following products can be obtained as an option and/or
accessory:
- Outlet transition
- TEV-385: TOL 250
- TEV-585: TOL-315
- TEV-765: TOL-400
- TEV-985: TOL-500
- Soft connection
- TEV-385: SC-160 (inlet); SC-250 (outlet)
- TEV-585: SC-200 (inlet); SC-315 (outlet)
- TEV-765: SC-250 (inlet); SC-400 (outlet)
- TEV-985: SC-315 (inlet); SC-500 (outlet)
- Vibration dampers
- TEV-385/585: TEV-AV (4 pcs)
- TEV-765/985: TEV-AV (6 pcs)
1.5

Technical specifications

Motor design
Speed of revolutions
Insulation class
Protection class
Max. starts/stops per hour
Max. airflow temperature
Noise level according to
ISO 3746
- TEV-385
- TEV-585
- TEV-765
- TEV-985
Connection voltages
- TEV-385
- TEV-585
- TEV-765
- TEV-985
Power
- TEV-385
- TEV-585
- TEV-765
- TEV-985
Nominal current
- TEV-385
- TEV-585
- TEV-765
- TEV-985
Refer to the available product data sheet for
detailed specifications.
1.6 Dimensions
Refer to Fig. I on page 37.
Fig. I
L = Fan wheel (not shown)
1 = diameter
2 = width
1.7 pressure drop
Refer to Fig. II on page 38.
Fig. II
A = Static pressure (Pa)
B = Airflow (m /h)
3
IE2
2800 rpm
F
IP 55
30
80°C (176°F)
80 dB(A)
86 dB(A)
87 dB(A)
96 dB(A)
230-400V/3~/50Hz
230-400V/3~/50Hz
230-400V/3~/50Hz
400-690V/3~/50Hz
0,37 kW (0,5 HP)
2,2 kW (3 HP)
4 kW (5 HP)
7,5 kW (10 HP)
3,02/1,7 A
7,98/4,61 A
13,32/7,69 A
14,1/8,2 A
EN - 3