Assembling Your Mixer - JENN-AIR JSM900 Guia Del Usuario

Assembling Your Mixer

:
NOTE Before first use, wash bowl and attachments in hot, soapy water. Rinse and
dry.The bowl and attachments are also dishwasher safe.
To attach the bowl
1. Make sure the touch wheel control is set to "OFF"
and the power cord is unplugged.
2. Press the mixer head release button and lift the
mixer head up until it locks into place.
3. Place bowl on the bowl locking plate and turn clock-
wise until the bowl locks into place.
4. Attach the dough hook, flat beater or wire whip to
the mixer attachment post (see page 8).
5. Lower the mixer head by pressing the mixer head
release button and guiding the mixer head down
carefully with your hands.
6. Plug power cord into a grounded 3-prong electrical outlet.The mixer is now
ready to use.
Electrical Shock Hazard – Plug into grounded outlet. Do not remove ground
prong. Do not use an adapter. Do not use an extension cord. Failure to follow these
instructions can result in death, fire or electrical shock.
To remove the bowl
1. Make sure that the touch wheel control is set to "OFF" and the power cord is
unplugged.
2. Press the mixer head release button and lift the mixer head up until it locks
into place.
3.Turn the bowl counterclockwise to unlock and remove.
WARNING
7