Before You Call For Service - JENN-AIR JSM900 Guia Del Usuario

Before You Call for Service

PROBLEM
The mixer will
not start.
The mixer bowl
wobbles back and
forth when mixing.
The mixer is
spattering ingredients
outside the mixer
bowl.
The mixer motor
seems to be bogging
down.
The mixer shuts down
while mixing.
POSSIBLE SOLUTION
• Check the power cord to make sure it is securely fas-
tened into the mixer and into the electrical outlet.
• Make sure the mixer head has been lowered and
locked into place.
• Be sure you've turned the touch wheel control to one
of the 10 power settings.
• Press the start button in the center of the touch wheel
control.
• Make sure the bowl is securely locked into place on
the bowl locking plate before operating the mixer.The
bowl should be level and will lock into place with a
slight turn.
• Make sure that the beater attachment is not contacting
the bowl. If necessary, adjust the mixer head height
with the adjustment screw until the beater clears the
bottom of the bowl. See page 8.
• The bowl may be overloaded.
• The speed may be turned up too high.The 400-watt
motor on your mixer is powerful.Try a lower speed.
• The mixing bowl may be overloaded with a heavy mix-
ture. If so, divide into smaller portions and resume
mixing.
• The mixer has been programmed to protect itself from
damage while mixing heavy loads. Divide the load into
smaller portions. Restart the mixer.
12