Important Warnings And Restrictions; General; When Using The Drum; When Using The Flatbed - imacon Flextight Progression Guía De Usuario

Hardware ReferenceÑFlextight Progression
6

Important Warnings and Restrictions

Important Warnings and Restrictions

General

¥ Read all of the included documentation before attempting to install
and use the scanner.
¥ Before shipping the scanner, always place the scanner into drum
scanning mode and replace the protective packaging material. See
ÒPreparing the Scanner for TransportÓ on page 37 for instructions.
¥ When you turn on the scanner, the drum will roll to the load posi-
tion, if it is not there already. Do not touch the scanner while the
drum is rotating.
¥ Do not place your Þngers or any other object into the scanner while
it is connected to a wall socket.
¥ Install the scanner in a location where children can not get to it. It
contains small openings and moving parts that can cause injury.
¥ The scanner contains glass plates, which can shatter if abused, creat-
ing dangerous sharp edges. Take care not to break the plates.
¥ Make sure that you install the scanner in a place that meets all of the
requirements given in ÒEnvironmental RequirementsÓ on page 11
and ÒElectrical RequirementsÓ on page 11.

When using the Drum

¥ Do not touch the originals or the original holder during the scan.
¥ Do not start scanning or previewing a transparency until an original
holder with an original has been mounted.
¥ A ßexible original holder is only to be mounted or removed when
the drum is in the load position.
¥ Do not touch the scanner while the drum is rotating.

When using the Flatbed

¥ Do not attempt to scan any original thicker than 10mm. If you do,
the glass plates may break as the ßatbed is drawn into the scanner
during the scan.
¥ Do not touch the drawer during the scan.
¥ Do not block the drawer when it is moving.
¥ Do not try to move the upper part of the drawer manually. Use only
the ßatbed button on the front panel.
Imacon Flextight Progression UserÕs Guide